DOWNLOADS

Tremco 250 GC

Single-Component, Rapid Curing, Fluid-Applied Elastomeric Waterproofing Membrane TREMproof® 250GC is a rapid-curing, high-solids, VOC-compliant modified polyurethane waterproofing membrane that can be applied to damp and green concrete. TREMproof 250GC is a one-part moisture-curing elastomer available in three viscosities: Self-Leveling (SL), Roller (R) and Trowel (trowel intended for detailing work only).

Basic Uses

TREMproof 250GC is designed for use on backfilled walls, split slab applications, planters and submerged conditions.

What applications are TREMproof 250GC suitable for

TREMproof 250GCis suitable for backfilled walls, between slab and planter applications.TREMproof 250GCmay also be used in non-potable water storage tanks.

What viscosity grades are TREMproof 250GC available in?

S/L = Self-Leveling, R = Roller Grade, and T = Trowel Grade.

Can TREMproof 250GC be applied in cold weather below 40°F (5°C)?

TREMproof 250GCmay be applied at temperatures below 40°F (5°), however, all substrates must be clean, dry and frost-free. It is Tremco’s best recommendation to apply products when substrate and ambient temperatures are at 40°F (5°) and rising. Please note the following when applying these products at temperatures below 40°F (5°).

Special Note: 

TREMproof 250GCcan freeze while in the pail but it will make it very difficult to apply to the substrate and will significantly increase cure times.

Do TREMproof 250GC require a protection course

TREMproof 250GCrequires a protection course. A TREMDrain drainage course may be an acceptable substitute or used as an add-on.

What is the advantage of combining a drainage mat with a below-grade waterproofing membrane?

Use of a drainage mat reduces hydrostatic head pressure, affords protection to the membrane and better directs water to the perforated foundation drainage system. Combining a drainage mat with a Tremco below-grade waterproofing membrane typically qualifies for extended warranties.

What ASTM specification does TREMproof 250GC meet?

TREMproof 250GCmeets or exceeds all minimum performance requirements of ASTM C 836.

How long does the concrete have to be cured before TREMproof 250GC can be applied?

TREMproof 250GConly requires 24 hours following the removal of concrete form work.

What is the typical minimum dry mil thickness requirement for TREMproof 250GC?

60 mils.

Can TREMproof 250GC be sprayed?

Spraying ofTREMproof 250GCis not recommended. If a sprayable membrane is preferred or required,TREMproof 260may be a suitable alternative. Please consult with Technical Service.

Inquire for pricing
Order now

Place Your Order

OUR SALES TEAM WILL CONTACT YOU ASAP.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
VISIT US IN-STORE: CLICK BELOW
OUR LOCATIONS

More Products

Similar products that are popular with our clients